Welcome to Ningbo YOYE Hydraulic Co.,Ltd.

Search
Submit
Cancel
News
>
>
Considerations for installation of hydraulic cylinder

Considerations for installation of hydraulic cylinder

Considerations for installation of hydraulic cylinder

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2019-06-12
  • Views:16

(Summary description)out of the box: cylinder sealed in VCI agents, therefore, allowed to remove inlet plug before assembling. If you remove the plug must be installed on the body, and inside the cylinder filled with oil

Considerations for installation of hydraulic cylinder

(Summary description)out of the box: cylinder sealed in VCI agents, therefore, allowed to remove inlet plug before assembling. If you remove the plug must be installed on the body, and inside the cylinder filled with oil

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2019-06-12
  • Views:16
Information

1, out of the box: cylinder sealed in VCI agents, therefore, allowed to remove inlet plug before assembling. If you remove the plug must be installed on the body, and inside the cylinder filled with oil

2, rust-proof: after the fuel tank mounted on the body, if the piston out of the case is placed must be in the exposed portion of the piston rod coated with grease.

3, speed: General specification of the cylinder, when the action faster than 2m/s, whose service life will be affected. With 0.3M/s as stroke end, for the purposes of protection and security, recommended installing buffer. In addition, the cylinder is stopped, in order to protect the cylinder bodies and security reasons, lines must also be considered, in order to prevent a big shock. In order to increase the amount of oil cylinder, circuit design, should pay special attention. In 0.5M/min the following low-speed operation, will impact movements (in particular vibration), so low-speed operation, the negotiations should be conducted.

4, operation: operational early, must be completely in the oil tank of the air. Entrapped air, fully functioning at low speed, to exclude air. If the residual air in the cylinder affected by a sharp pressure, then, because of the effects of hydraulic oil, are likely to seal burned. Besides this, if the negative pressure within the fuel tank, then will have the exception may occur due to cavitation.

 

优液

Scan the QR code to read on your phone

Relevant information

Contact Us

ADD:No.68 Deli Road,Mianfeng Village,Jiaochun Street,Zhenhai District,Ningbo China,315200

Tel:+86-0574-86367818, +8618267467032 (Julia )

Fax:+86-0574-86553736

Email: Julia@nb-yoye.com

Skype: Juliazhux@163.com

Web: www.nb-yoye.com

 

Request A Quick Quote Now

留言应用名称:
客户留言
描述:

Download

Copyright © 2021 Ningbo YOYE Hydraulic Co.,Ltd All rights reserved. 浙ICP备17003142号-1  Powered by www.300.cn